DriveRight GPS/Wireless Interface Module 8127

Driveight® GPS/Wireless Interface Module #8127
The GPS/Wireless Interface module provides an easy connection point for connecting modules that allow you to use GPS and wireless download options with your existing DriveRight.

The GPS/Wireless Interface Module (#8127) for DriveRight connects the GPS Module (#8128), and/or the Wireless On-Board Module (#8129) to a DriveRight 600E device.


Operating Temperature:	-40°F to +176°F (-40°C to +80°C)
Storage Temperature:	-40°F to +185°F (-40°C to +85°C)
Input Power:	11 to 18 Vdc (12 Vdc nominal), 60-270mA
Typical Standby Current:	3mA
Typical Operating Current:	60-270mA
Size (l x w x h):	3.63'' x 2.50'' x 1.00'' (93 mm x 64 mm x 26 mm)
Weight:	4.16 oz. (0.12 kg)
Cable Connection:	Module to adapter cable... Male 8-pin Mini-DIN / 14'' (355 mm) Module to DriveRight 600E... Female 8-pin Mini-DIN / 24'' (609 mm)
Cable Length:	Module to adapter cable... 14'' (355 mm) Module to DriveRight 600E... 24'' (609 mm)


Click link to view the literature
• Instruction Manuals This manual provides the instructions necessary to install the GPS Module (#8128), and the Wireless On-Board Module (#8129) with your DriveRight 600 or 600E device using the DriveRight GPS/Wireless Interface Module (#8127) or with your CarChip Fleet Pro using the CarChip Fleet Pro GPS/ Wireless Interface Module (#8251). • Specification Sheet (pdf) The GPS/Wireless Interface module provides an easy connection point for connecting modules that allow you to use GPS and wireless download options with your existing DriveRight or CarChip products.

	GPS Module	See how and where your vehicles are being driven. Plugs quickly and easily into the CarChip data logger using the appropriate GPS/Wireless Interface Module.
	#8128

	Wireless On-Board Module	Take all the trouble out of downloading driving data to your company PC. With the Wireless Download System, drivers just pull into your parking lot and their data is sent automatically to the PC.
	#8129

	Wireless Base Station	Receives data from the Wireless On-Board Module and passes it on to the Fleet Management Software. One Base Station per parking lot or office. Larger parking lots may require more than one Base Station.
	#8130

	Configuration Cable	For Wireless On-Board Module. Connects the Wireless On-Board Module to the USB port on your PC for configuration before initial use. One per office or fleet location.
	#8131


Wiring the GPS/Wireless System with a DriveRight 600E The following wiring diagrams display all the possible wiring solutions for connecting the GPS/Wireless Interface Module, GPS Module, and Wireless On-Board Module to an existing DriveRight 600E system.


Wireless Download System Network Set Up The following diagram is of a sample Wireless Download System network.